Description     -  For More details Contact Whatsapp No  7259687103

LPC1768  Development Board is a powerful development platform based on LPC1768  CORTEX M3 Based microcontroller with 512K on-chip memory. The board is designed for general purpose applications, Onboard ISP Programmer via USB & RS232 Can directly interfaced to Flash Magic Tool, Alpha Numeric LCD interface, onboard RTC battery holder, 2 CAN Tranrecivers .The I/O pins on the microcontroller can be accessed from a 40 pin male header. This direct access to I/O pins enables you to connect your own devices very easily to the processor

Features of LPC1768

Best in class Cortex M3 Hardware.

1. 100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash.
2. 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins.

 Special Feature of this Board :

• On Boards USB Download  facility  
•  CH340 Embeded on the board itself ,
•  No need to press ISP Switch 
•  RTS CTS Control via CH340 chip   

Technical Specifications :

•    Microcontroller: LPC1768 with 512K on chip memory
•    Crystal for LPC1768: 12Mhz
•    Crystal for RTC: 32.768KHz
•    7 SEGMENT Display SPI Interface MAX 7219 Based 
•    On board Two Line LCD Display (2x16)
•    On board 1 analog input WITH POT+LM35 Temparature sensor
•    Two RS-232 Interfaces (For direct connection to PC’s Serial port)
•    On board USB to UART for Flashing using Flash magic 
•    On Board 2 CAN Ports 
•    On Board I2C 24cxx EEPROM
•     All Port Pins available at Berg Strip
•    3V button cell for on chip RTC
•    On Board Power LED Indicator
•    Four 5v power supply connectors for external device power up.
•    ON/OFF switch
•    Power plug-in jack(power supply AC/DC 12V) -  USB Powered 

USB Boot Loader

The Board can also be programmed via USB Secondary Bootloader. Check LPC1768 USB Boot Loader document for more details.

ISP Programming:

Programming can be done through the on chip boot loader using On Board USB  or   UART interface (UART0).  The tool used for programming is Flash Magic.

Package Content :

•   LPC 1768 MIN DEV BOARD
•   USB CABLE
•   Software CD.   Downloads