Introduction :
AVR JTAG ICE 3   is a programmer / debugger  for microchip studio 

Features :

Atmel JTAGICE3 Features • Fully compatible with Atmel Studio • Supports programming and debugging of all Atmel AVR UC3 32-bit microcontrollers • Supports programming and debugging of all 8-bit AVR XMEGA devices • Supports programming and debugging of all 8-bit Atmel megaAVR and tinyAVR devices with OCD • Supports programming and debugging of all SAM ARM Cortex-M based microcontrollers • Target operating voltage range of 1.65V to 5.5V • Draws less than 3mA from target VTref during operation • Supports JTAG clock frequencies from 32kHz to 15MHz • Supports PDI clock frequencies from 32kHz to 10MHz • Supports debugWIRE baud rates from 4kbit/s to 0.5Mbit/s • Supports aWire baud rates from 7.5kbit/s to 7.5Mbit/s • Supports SPI clock frequencies from 8kHz to 1.875MHz • Supports UPDI baud rates from up to 750kbit/s • Supports SWD clock frequencies from 32kHz to 2MHz • USB 2.0 high-speed host interface • ITM serial trace capture at up to 1MB/s • Supports 10-pin 50-mil JTAG connector, as well as 10-pin 100mil JTAG, 6-pin 50-mil SPI, and 6-pin 100-mil SPI interfaces using adapters

For more details Contact whatsapp No 

7259687103