N S K E L E C T R O N I C S


Go to content

Main menu:


SERIAL 2 ETHERNET

Wired Communication


Serial-to-Ethernet (S2E) Module -

S2E module accelerates the product development by providing ready-to-runhardware and comprehensive documentation. The compact design is based on the TEXAS microcontroller, a highly integrated ARM® CortexTM –M3 microcontroller with integrated 10/100 Ethernet MAC and PHY, 50-MHz performance, and ample single cycle onchip Flash and SRAM memory for efficient network traffic handling.The S2E module includes one 10/100 Ethernet port, two serial ports and 10-bit,3-channel ADC with flexibility that includes both RS-232 and CMOS/TTL level signalling, flowcontrol, and hardware support for both synchronous and asynchronous serial communication.The most common application for the S2E module is for augmenting legacy products thatcontain a serial port for a configuration or control interface. Simply installing a S2E module into the legacy serial device provides instant networking capability with no major board redesign or software changes, a tiny form-factor for unobtrusive implementation, and cablelengths much longer than what is available for simple serial connections.

Features

The S2E module provides the following features

  • 10/100 Mbit Ethernet port
  • Auto MDI/MDIX.
  • Traffic and link indicators.
  • Two serial ports, configured as data communication equipment (DCE), include
  • RTS/CTS for flow control
  • PORT0 has RS-232 levels, transceiver runs at up to 250 Kbits/sec
  • PORT1 has CMOS/TTL levels, can run at 1.5 Mbits/sec
  • Both serial ports are independent and may be used simultaneously.
  • Module software
  • IP configuration with static IP address or DHCP.
  • Raw and Telnet protocol support for access to serial port.
  • Web server for module configuration.
  • Multi-port virtual com port software for Windows.
  • Universal Plug and Play (UPnP) for device discovery.
  • Module supports 5 V and 3.3 V supplies.
  • Multiple mounting options.
  • Protocols include ARP, IP, ICMP, UDP, TCP, HTTP, DHCP, and Telnet?


Package Contents

  • S2E Board
  • RS232 with Power supply Interfaced Board
  • Etehrnet cabel - Extra ( Order If Needed )
  • Power supply - Extra ( Order If Needed )


Download Software & manual

Home Page | NSK PRODUCTS | INDUSTRIAL AUTOMATION & PLC | MINI PROJECTS >>> | 8051 | PIC | AVR | Arduino | ARM 32 Bit | RENESAS | MSP 430 | ARM CORTEX M3 | VLSI - CPLD KITS | UNIVERSAL PROGRAMMERS | Audio&Voice Recognition | GSM MODEMS & GPS | RFID - MIFARE | Wired Communication | Wireless Communication | SENSORS | INTERFACE BRDS | POWER SUPPLIES BRDS | MOTOR DRIVES | MOTORS | ROBOTICS | PCB - Prototyping | BUY COMPONENTS/TOOLS | ELECTRONIC COMPONENTS | CONTACT US | How To Place Order? | NSK SUPPORT | Site Map

Search

Back to content | Back to main menu